2 Solid Brass Wine Bottle Wick Holders Oil Candle Tiki Torch 10" Wicks

Description

Package of 2 Solid brass wine bottle wick holders great for wine bottles, or create your tiki torch candles.  This brass
wick holder includes a 10" wick, 1/4" round fiberglass wick for each wick holder.
Fits many wine, beer, and oil (olive, etc.) bottles. The diameter of your bottle opening needs to be greater than 1/2" and less than 7/8". Not Retail Packaged.
Fiberglass wick does not burn away like cotton wick and offers a better fuel flow efficiently and economically for the best flame shape, color and smoke-free operation of your oil candle.
Great for your decorative bottle indoor candles if you use 99% Liquid Paraffin Oil.  This is a clean burning oil.  Keep your wick low to prevent soot and start with your oil level  about 2 inches down from the top of your bottle.
The width of this brass wick holder measures 22mm or 7/8"
Overall length is 30mm or 1 1/8”
This brass bottle wick holder tapers from its width of  7/8”(22mm)  to a 3/8” tip (10.5mm)
Height the wick holder is raised above the top is 4mm (1/8”)
Wick Opening is 5mm (3/16”)
Note:  ALWAYS MEASURE THE OPENING OF THE WINE BOTTLE THAT YOU HAVE.  There are many wine bottles that have different size openings!  This is not a cork or a stopper, it is designed to hold the wick in place and sit on top of your bottle with the neck of the wick holder extending down inside of the wine bottle.
To insert the wick into the wick holder, compress one wick end and feed the wick in an upward motion through the bottom of the wick holder until it feeds through the top, then pull through.